Amsoil CL Series Semi-Synthetic Chain Oils
Amsoil PC Series of Synthetic Compressor Oils
PRODUCT DESCRIPTION
AMSOIL Semi-Synthetic CL Series Chain Oils are anti-wear, mild EP, long-life oils which incorporate the highest quality synthetic and petroleum base fluids. They offer extended operational temperature ranges and enhanced thermal stability properties.

The additive chemistry used in AMSOIL CL Series Oils provides excellent friction reduction, and the combination of base stocks greatly improves performance over petroleum, even in severe environments. The oils contain additives to combat wear and are fortified with a tackifying agent, helping the products cling to critical parts during operation and at shut down. This allows a lubricating film to be present immediately at start-up, when it is needed most.

Problems with petroleum oils, such as unacceptable cold temperature performance (typically a OºF pour point) and quick oxidation and degradation (causing carbon and sludge buildup), can easily be overcome by using AMSOIL CL Series Oils. The ability of the semi-synthetic formulation to provide cost-effective, problem-solving service means increased uptime, high efficiency and savings through reduced maintenance costs.

NOTE: For EP specified lubricants, please refer to AMSOIL SG Series Gear Oils
PERFORMANCE FEATURES
  • Superior film strength
  • Outstanding antiwear performance
  • Moderate shock loading protection
  • Positive seal and petroleum oil compatibility
  • Enhanced cold-temperature performance
  • Enhanced cold-temperature performance
  • Excellent rust and corrosion prevention
  • Exceptional multifunctional properties
  • Versatile operational temperature range (-30ºF to 250ºF continuous and 300ºF intermittent)
TYPICAL TECHNICAL PROPERTIES
Semi-Synthetic CL Series
Chain Oils 		CLJ
ISO 68 		CLK
ISO 100 		CLL
ISO 150 		CLM
ISO 220
ISO VG -- ASTM D-2422 68 100 150 220
Viscometrics 100 o C, cSt
-- ASTM D-445 		9.6 12.41 15.76 20.59
Viscometrics 40 o C, cSt
-- ASTM D-445 		68 102.57 150.46 219.23
Viscosity Index -- ASTM D-2270 121 114 108 110
Specific Gravity g/ml-- ASTM D-1298 0.8751 0.8591 0.8654 0.8745
Density lbs./gal. -- ASTM D-1298 7.287 7.153 7.206 7.282
Flash Point ºC (ºF) -- ASTM D-92 240 (464) 248 (478) 252 (486) 246 (475)
Fire Point ºC (ºF) -- ASTM D-92 268 (514) 282 (540) 278 (532) 280 (536)
Pour Point ºC (ºF) -- ASTM D-97 -40 (-40) -38 (-36) -35 (-31) -35 (-31)
Noack Volatility,
% weight loss -- DIN 51581 		7.06 5.22 5.77 5.69
Four-Ball Wear Test -- ASTM D-4172 Mod.
(40 kg, 1200 rpm, 75 ºC, 1 hr., mm) 		0.45 0.45 0.45 0.45
Copper Strip Corrosion Test -- ASTM D-130 1A 1A 1A 1A
AMSOIL PRODUCT WARRANTY
AMSOIL Industrial Lubricants are formulated to meet or exceed accepted industry specifications. AMSOIL warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL products are used in full compliance with the company’s recommendations. However, the purchaser of these lubricants is responsible for determining if these specifications are adequate and proper for the intended application. The AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No additional warranty, expressed or implied, can be made.
AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55-gallon drums, 275-gallon totes and bulk quantities. For 275-gallon totes, please allow two to four weeks for delivery.
AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands.
Copyright © Amsoil 1996