| Amsoil Dual Remote Filter Systems |
|---|
|
|---|
![]() |
| Oil filtration is critical to engine life. Abrasive particles in dirty oil can quickly destroy critical components and ruin precision clearances in an engine if not removed through filtration. Today’s engines, however, are designed with smaller, lower capacity oil filters which are harder to get to for servicing. This means less efficient filtration and a reluctance to change filters at regular intervals, leading to a build-up of dirt in the oil. The AMSOIL Dual Remote Oil Filtration System is designed to provide superior filtration efficiency, increase oil capacity and improve oil filter accessibility. Superior Filtration Efficiency A vehicle’s regular oil filter is a full-flow filter. This means that all the oil pumped by the engine must pass quickly through the filter before it reaches the engine. This high flow demand limits the size of particles conventional filters can effectively remove. |
Increased Oil Capacity
The trend to downsize engines over the past several years has significantly reduced oil sump capacities. By installing the dual remote system, oil sump capacity can be increased up to 50 percent. |
Improved Accessibility
The dual remote mount is designed to make filter changes easy and convenient. It accomplishes this by using a remote filter mount that is easily installed in an accessible area of the engine compartment. The mount is connected to the engine block by two oil lines and a special spin-on oil filter adapter. Increased Filter Size Many auto manufacturers have been using smaller full-flow filters to help squeeze their engines into tighter engine compartments. But reducing filter size severely limits their service life and holding capacity. |
| Service Life Recommendations - Personal Vehicles |
| Type of Unit | Stock Number | Size (Approx.) | Additional Oil Needed | Crankcase Capacity | Normal Service Life b |
Applications |
| SINGLE SPIN-ON ELEMENTS
(Used with BMK-11 or any DUAL REMOTE SYSTEM) |
BE-90 | Diam. = 4.5 in. Height = 6 in. With Mnt. = 8 in. |
1 qt. | up to 9 qt. | 25,000 miles or 1 year
(approximately 4 times normal drain interval) |
Pleasure Vehicles, Light Trucks and Smaller Commercial Applications |
| BE-100 | Diam. = 4.5 in. Height = 8 in. With Mnt. = 10 in. |
1.5 qt. | up to 15 qt. | |||
| BE-110 | Diam. = 4.5 in. Height = 10 in. With Mnt. = 12 in. |
2 qt. | up to 21 qt. |
| a. Filters can be used on sumps of larger capacity but then require more frequent replacement. Full details on service life included with filter installation instructions b. Data determined in a non-turbo gasoline engine with AMSOIL 100% Synthetic Motor Oil and AMSOIL Full-Flow Oil Filter. Service life varies in other engines (turbo and diesel) and with other oils and filters. |
| Dual Remote Dimensions |
![]() |
| Copyright © Amsoil 1998 |
|