The Fast, Easy & Accurate Way To Evaluate Batteries.

Get a complete battery analysis in about 6 seconds with the durable, hand held 475 Digital Battery Analyzer. It displays voltage, battery condition and available power quickly so you know immediately if your battery needs service or if the battery is bad.

If you work in any shop or facility that services vehicles and equipment, then you need the 475 Digital Battery Analyzer. It is the fast, accurate and easy-to-use solution to your battery testing needs. Traditional battery tests are too cumbersome, require batteries to be fully charged, and are too time consuming. Not the 475. This unit gives an accurate reading on batteries even as low as 5.5 volts.

It doesn’t discharge a battery during testing either. Traditional testing discharges a battery which means it has to be recharged before it can be used. Besides being time consuming, this “loading” could ultimately damage the battery. With the 475, you test and go.

Revolutionary Conductance Testing

The 475 uses a patented testing method called “conductance testing”. Conductance describes the ability of a battery to conduct the current needed for its various functions. It’s been proven that a linear relationship exists between battery conductance and capacity, or total energy delivered by batteries in time-discharged tests.

Since conductance is proportional to battery capacity, it can effectively identify cells or batteries which may require attention or replacement due to defects or deterioration. Not only do you save time with the testing, you also reduce the time wasted on trying to charge bad batteries. With the 475, you test the battery condition first, then recharge only the good ones.

Another advantage is that the voltage and current applied by this type of testing are very low, so there is never any danger of harming the battery.

The 475 will even tell you if a battery needs to be conditioned with a PulseTech “pulse technology” product to remove sulfation buildup rather than be replaced.

741x475

Benefits
• Clear, fast & accurate results.
• Complete battery analysis: Digitally displays voltage, battery condition and available power.
• Works with all 6 and 12-volt batteries, including lead-acid, alkaline and ni-cad.
• Simple two-step testing method with easy-to-follow self-prompting instructions.
• Does not discharge or harm batteries.
• 100% effective in determining bad batteries.
• Testing is passive and repeatable.
• No external battery or ac power required.
• Computer calibrated according to ISO requirements.
• One-year limited warranty.