Pulsetech Battery Products

12V Powerpulse 390PT Digital Battery Conductance Analyzer

The Fast, Easy & Accurate Way To Evaluate Batteries.

741x390

Get a complete battery analysis in about 6 seconds with the durable, hand held 390PT Digital Battery Analyzer. It displays voltage, battery condition and available power quickly so you know immediately if your battery needs service or if the battery is bad.

If you work in any shop or facility that services vehicles and equipment, then you need the 390PT Digital Battery Analyzer. It is the fast, accurate and easy-to-use solution to your battery testing needs. Traditional battery tests are too cumbersome, require batteries to be fully charged, and are too time consuming. Not the 390PT. This unit gives an accurate reading on 6 and 12v batteries.

It doesn’t discharge a battery during testing either. Traditional testing discharges a battery which means it has to be recharged before it can be used. Besides being time consuming, this “loading” could ultimately damage the battery. With the 390PT, you test and go.

Revolutionary Conductance Testing

The 390PT uses a patented testing method called “conductance testing”. Conductance describes the ability of a battery to conduct the current needed for its various functions. It’s been proven that a linear relationship exists between battery conductance and capacity, or total energy delivered by batteries in time-discharged tests.

Since conductance is proportional to battery capacity, it can effectively identify cells or batteries which may require attention or replacement due to defects or deterioration. Not only do you save time with the testing, you also reduce the time wasted on trying to charge bad batteries. With the 390PT, you test the battery condition first, then recharge only the good ones.

Another advantage is that the voltage and current applied by this type of testing are very low, so there is never any danger of harming the battery.

The 390PT will even tell you if a battery needs to be conditioned with a PulseTech “pulse technology” product to remove sulfation buildup rather than be replaced.

AGM Testing Algorithm
Improved battery algorithms - more decisive, more accurate than ever before.
Enhanced in-vehicle test algorithms based on OEM requirements and vehicle changes, including jumper-post testing for vehicles with remote batteries.
Enhanced graphical printout.
QC mode for simple quality control testing and record keeping on battery inventory - stores up to 100 tests.
Reverse connection detection for foolproof operation.
Time-to-charge calculator estimates battery charge duration.
Date and time stamp improves record keeping and helps enforce preventative maintenance testing.
One-year limited warranty.

741x390

Benefits

Clear, fast & accurate results.
Complete battery analysis: Digitally displays voltage, battery condition and available power.
Works with all 6 and 12-volt batteries, including lead-acid, alkaline and ni-cad.
Does not discharge or harm batteries.
100% effective in determining bad batteries.
Testing is passive and repeatable.
Uses power of the battery under test or 9V battery (included).
One-year limited warranty.

390PT Specifications

Operatng Range	40-2000 CCA/CA/AGM
Voltage Range	0.9 - 30V dc
Power Source	Uses power of the battery under test or 9V battery, (included)
Operating Temperature	32-122°F
Display	Backlit, graphical
Language	Multi Language Capable.
Housing Dimensions	9.75" X 7.75" X 3"

The 390PT has replaced the 475
more capable, less money!

obsolete - 475 Specifications

Operatng Range	100-1400 CCA
Voltage Range	5.5-14V dc
Power Source	Uses power of the battery under test (min. 5.5V OCV required)
Operating Temperature	32-120°F
Display	2 line, 16 char. LCD
Weight	15 oz.
Housing Dimensions	9" X 4" X 2.25"