PRODUCT DESCRIPTION
AMSOIL DOMINATOR Synthetic 2-Cycle Racing Oil is a robust formulation specially engineered for unsurpassed protection in high performance two-cycle motors, both on and off the track. It contains heavier synthetic base oils that provide more lubricity for "on the edge" operation. DOMINATOR reduces friction and protects pistons and bearings subjected to the rigors of racing. DOMINATOR contains the right additives for clean motor operation.
Product Code: TDR

PRODUCT DESCRIPTION ** Replaced by DOMINATOR **
AMSOIL Series 2000 Synthetic 2-Cycle Racing Oil (TCR) is a formulation of carefully selected synthetic basestocks and premium additives, providing excellent performance in both air cooled and water cooled two-cycle motors. AMSOIL TCR is fortified with corrosion inhibitors to prevent rust from condensation at shut down and during off-season storage. The AMSOIL racing formulation is based on extensive research conducted both in laboratories and on the race track. AMSOIL TCR provides superior lubrication, protection and performance for two-cycle motors in the most demanding applications.
Product Code: TCR

The complete data sheet in pdf format.

NOTE: This product replaced by DOMINATOR

PRODUCT DESCRIPTION
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.

AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel Injected (EFI) and direct fuel injected (OFI) snowmobiles, personal watercraft, motorcycles, ATVs and jet boats, including, but not limited to, those manufactured by Bombardier®, Yamaha®, Arctic Cat®, Polaris®, Kawasaki®, Suzuki® and Honda®.
Product Code: AIT

The complete data sheet in pdf format.

PRODUCT DESCRIPTION 100:1 Pre-Mix
AMSOIL Saber Professional (ATP) oil is specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios from this premium synthetic formulation.

Product Code: ATP

PRODUCT DESCRIPTION Outboard 100:1 Pre-Mix
AMSOIL Saber Outboard (ATO) Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios for this premium synthetic formulation.
Product Code: ATO

PRODUCT DESCRIPTION ** Replaced by SABER **
Reduce friction and wear, improve throttle response and deliver maximum power. Clean-burning formulations prevent plug fouling and carbon deposits. Deliver quick, dependable starts. Reduce smoke and emissions and won't "load up" during prolonged idling. Provide outstanding cold temperature flow. Contain special anti-rust agents for off-season storage.
Product Code: ATC

The complete data sheet in pdf format.

NOTE: This product replaced by SABER Professional

PRODUCT DESCRIPTION Injector Oil / 50:1 Premix
AMSOIL HP Injector Synthetic 2-Cycle Oil is a precise synthetic formulation that exceeds the lubrication demands of modern two-cycle engines. It contains premium synthetic base oils and MAX-DOSE additive system, providing superior performance in direct fuel injected (DFI), electronic fuel injected (EFI) and carbureted outboard motors, as well as other recreational two-cycle equipment.
Product Code: HPI

PRODUCT DESCRIPTION ** Replaced by HP Injector **
Reduce friction and wear, improve throttle response and deliver maximum power. Clean-burning formulations prevent plug fouling and carbon deposits. Deliver quick, dependable starts. Reduce smoke and emissions and won't "load up" during prolonged idling. Provide outstanding cold temperature flow. Contain special anti-rust agents for off-season storage.
Product Code: AIO

The complete data sheet in pdf format.

NOTE: This product replaced by HP Injector